Sorry, you need to enable JavaScript to visit this website.
Monday, September 4, 2017 2:21:14 PM

Virtual Recorder v1.4.0.2 setup+portable

Last updated on Sunday, October 20, 2019 - 14:03 by AbdullahZubair
dts5901's picture
Operating system: 
Sharing Options Share this

Virtual Recorder is a GUI/frontend for Virtual Audio Capture Device and the command line media converter FFmpeg. Virtual Audio Capture Device is a DirectShow audio device which can be used to capture/record what is playing through your speakers. It is also possible to record what is being played through your speakers if your sound card has a loopback feature usually called "Stereo Mix"/"What You Hear" Unfortunately, not all sound cards support this feature, especially on laptops. Some other applications like Total Recorder, GoldWave, and Audacity can also record what is being played through your speakers. In the case of Total Recorder using it's own virtual audio drivers. In the case of GoldWave and Audacity using the WASAPI loopback feature which is native to versions of Windows starting with Vista. However, Total Recorder and GoldWave are not free, and with the WASAPI loopback feature in Audacity, I kept receiving errors. FFmpeg is capable of accessing DirectShow audio devices for capturing/recording, but it is a command line utility with many confusing parameters for the average user. All of the above reasons prompted me to start working on Virtual Recorder. Virtual Recorder is free, and probably much easier to use than programs like Total Recorder, GoldWave, and Audacity if all you want is a basic audio recorder which can record what you hear, your sound card's input, or both at the same time. Virtual Recorder is not an attempt to compete with such applications. It is a simple audio recorder, that is all.


you can record from the virtual capture device which will only record what is playing through your speakers. For example, System sounds, audio from other applications including your browser, and so on. Of course this means that if you are recording an internet stream for example, system sounds, sounds produced by other applications, and anything else you might play will also be recorded. You should take steps when making such recordings to avoid this issue by not running such applications and possibly even disabling system sounds in Control Panel. You can also record from your sound card's line-in and microphone. Finally, you can record from both theirtual capture device and your sound card's line-in/microphone at the same time which might be useful for recording podcasts, Skype sessions, and so on. You can select what is recorded using the "Recording source" combo box. If you select the "Sound Card" or "Both" options, you should also choose the appropriate input from the "Device" combo box. Keep in mind that the virtual capture device only records from which ever sound card is configured as the default system playback device in Control Panel. So if you wanted to record both sides of a Skype session, you would have to take a few steps first.

  1. Make sure that the speakers or headset you are using in Skype are configured as the default playback device in Control Panel. It is not enough to select the device in the Skype audio settings. You can access the default audio devices in Control Panel quickly by pressing Windows key R to open the "Run" dialog, and then typing msys.cpl followed by Enter.
  2. Make sure that in Virtual Recorder, the "Both" option is selected in the "Recording source" combo box.
  3. Select the microphone you are using in the "Device" combo box.

Note that when recording from both the virtual capture device and your sound card at the same time, you may have overall lower levels in the resulting file. Use Virtual Recorder's "Record Volume" to compensate for this. It may require some experimentation to achieve desirable results.

The virtual capture device will not work on XP. It relies on the WASAPI loopback feature which is only available in versions of Windows starting with Vista. Therefore, on XP the "Recording source"

You can type a prefix which will be used in the file names of recordings. The current date/time will always be appended to file names so if you leave the "File name prefix" field blank, a name will still be automatically generated which consists of only the date and time.

You can record to the lossless flac/compressed, mp3, ogg, or lossless wav/uncompressed audio formats. Other formats could easily be added, but I figured these are the four most commonly used.


If you select the "Options" button, you can configure some settings such as whether the program runs at startup, minimized to the tray, or completely hidden by disabling the tray icon. There is also a "Global Hotkeys" tab where you can assign hotkeys for starting, stopping, pausing, and resuming recording when either the main window does not have focus or is otherwise hidden. You can also assign a hotkey for activating/showing the main window when it is hidden. Note that you cannot disable the tray icon unless the "Show main window" hotkey is assigned since otherwise you would not be able to access the program's main window. For each hotkey, there is an associated "Windows Key" checkbox. Use this checkbox if you want to use the Windows key modifier as part of your shortcut combination. For example, if you wanted to use Control-Windows-F12 to start recording, you would press Control F12 in the hotkey field and then enable the associated "Windows Key" checkbox. All settings are saved in the file “VirtualRecorder.ini” located in the same folder as the program's main executable.

Command line parameters

Last but not least, there are a few command line parameters for scheduling recordings with the Windows Task Scheduler or other scheduling software. Use -r to have the program start recording automatically, -t to set a duration for the recording, and -x to have the program close automatically when it is finished recording. The format for the duration should be hh:mm:ss (hours : minutes : seconds). For example:

  • record for 1 hour and then close: VirtualRecorder.exe -r -t 01:00:00 –x
  • Record for 1 hour and 30 seconds: VirtualRecorder.exe -r -t 01:00:30 -x
  • Record for 1 hour and 1 minute: VirtualRecorder.exe -r -t 01:01:00 -x
  • Record for half an hour, but leave the program running: VirtualRecorder.exe -r -t 00:30:00
  • Start recording and continue recording until manually stopped: VirtualRecorder.exe -r

Note that when recording using command line parameters, the shown/hidden state of the main window will depend on the settings in the "Options" dialog.